Switch v2 chainring

Product Description - practical, versatile, inexpensive The is part of the Switch Direct Mount chainring system and unlike previous Switch chainrings is also compatible with Shimano Hyperglide+ 12-speed chains. Thanks to OneUp Switch you can change the chainring in almost no time at all. Only a 4 mm Allen key is required to complete the set-up in the shortest possible time and the crank does not need to be removed. So if a steep trail gets in your way, you can switch to a smaller chainring in the parking lot. The Switch chainrings are uncompromisingly optimised and have already been successfully tested on the Enduro World Series. Their narrow-wide structure prevents the chain from dropping. And you'll save money with them too, because a OneUp Components Switch replacement chainring costs less than a new Direct Mount chainring. Specifications:Application:Enduro, All MountainMount:OneUp Components SwitchTeeth:28 T, 30 T, 32 T, 34 TGearing:1x8-speed, 1x9-speed, 1x10-speed, 1x11-speed, 1x12-speedTechnical Information:Material:aluminium (7075-T6)Compatibility:all 8-/9-/10-/11-speed chainsSRAM Eagle 12-speed chainsShimano Hyperglide+ (HG +) 12-speed chainscan only be used in conjunction with the Switch Carrier SpiderFeatures:chainring swap in under a minute (manufacturer specification)quick adaptation of the set-up to the conditionsless cost for spare chainringsnarrow-wide structure ensures the chain won't droprequires only a 4 mm hex key, cranks don't need to be removed Note:Loosen bolts with two turns, loosen and remove chainring with a 20° rotation. To fit the new Switch chainring, proceed in the opposite direction (the small bulge on the inner edge must be in line with the crank arm), 8 Nm tightening torque.Manufacturer Numbers:28 tooth:1C0649BLK30 tooth:1C0650BLK32 tooth:1C0651BLK34 tooth:1C0652BLKContents:1 x Manufacturer: OneUp Components Inc. Unit #1 1225 Industrial Rd West Kelowna BC V1Z 1G4 Canada support@oneupcomponents.com